My Blog

Carbon Steel Plates Stockist in USA

Home / Other Cities/Countries / Carbon Steel Plates in USA
Table of Content

Carbon Steel ASME SA516 Gr 60 NACE MR0103 Plates in Chicago, ASME SA516 Gr 70 NACE + HIC BQ Plates Distributor in New York, Boiler Quality ASME SA572 Grade 50 Plates Supplier in Los Angeles, CS ASME SA516 Gr 60 Plate, EN 10025 S355 J2+N Plate Manufacturer in Houston, BQ SA537 Class 1 Plates Stockist in USA.

RPF Pipes & Fittings is a prominent supplier, and exporter of Carbon Steel Plates in New York, USA. We stock a wide range of CS plates in an array of lengths, widths, and thickness according to ASTM A516 CS standards, ideal for boiler and pressure vessel and storage tank fabrication. We fabricate these ASTM A516| ASME SA516} Grade 70 NACE MR0175 Plate using premium quality raw materials and cutting edge technology equipment following national and international approved quality standards. The ASTM A516 is the Standard Specification for Pressure Vessel Plates, CS, for medium and lower temperature service for plates used in pressure vessel applications where exceptional notch toughness is needed. The ASME SA516 Carbon Steel Plates are divided into four grades having minimum Tensile Strengths ranging from 55 ksi to 70 ksi. Our High Manganese Wear Resistant Steel Plates are ideal for uses where high wear is combined with shocks or high pressure capable of work-hardened its austenitic structure. X120Mn12 Manganese Steel Plate is utilized in wearing plates, hammers or pulverizers, cutting edges of large excavators, cores and walls of parpen molds, and anti-drill plates such as security doors.

Abrasion Resistant 500 Plate Manufacturer in Los Angeles, Low carbon Plates Manufacturer in New York, BQ ASME SA572 Grade 50 Plate Distributor in Chicago, Chrome Moly ASTM A387 GR. 11 Class 1 Plates Exporter in Houston, ASME SA516 BQ Grade 70 Plate Manufacturer in USA, High Manganese Steel X120Mn12 Plate Exporter.

This ASTM A516 Carbon Steel Plate grade is a medium carbon alloy that also contains amounts of manganese, phosphorus, sulfur, and silicon. It is typically used in moderate and low temperature applications. We supply superior quality ASME SA516 Carbon Steel Plates for boiler and pressure vessel fabrication which is generally suited to the high standards set by the oil, gas, and petrochemical industry.
ASME SA516 CS Grade 70 Plate is an exceptional choice for service in lower than ambient temperature applications, has exceptional notch toughness, and is utilized in both pressure vessels and industrial boilers.

BQ ASME SA537 Class 1 Plate Stockist in New York, ASTM A516 CS Grade 60 Plate Manufacturer in USA, Hot Rolled Steel ASTM A516 Gr 60 Plates, Carbon Steel ASTM A572 Grade 50 Plates Distributor in Houston, Alloy Steel ASME SA387 GR. 11 Class 2 Plate Distributor in Chicago, Low silicon Plate Exporter in Los Angeles.

ASTM A387 Alloy Steel Grade 5 CL.1 / 2 Pressure Vessel Plate exhibit several properties like excellent weldability, high performance, durability, high strength, corrosion resistance, hydrogen stress cracking resistance, etc.

Our ASTM A387 Grade 5 CL.1 / 2 Pressure Vessel Plate are utilized in many applications like Bridges, Buildings and Construction, Automotive and Truck Parts, Railroad Cars, Cargo Containers, Tote Boxes, Construction Equipment, Structural Tubing, Lighting Standards, Transmission Poles, etc.

The ASTM A516 Carbon Steel plates come with mill certification in accordance with EN10204 3.1 or EN10204 3.2. Our plates are fully traceable, usually with hard stamping and we welcome any third party or customer inspection if required which can be arranged with the client.

STANDARD SPECIFICATION FOR CARBON STEEL PLATES

SPECIFICATIONS

ASTM A516 / ASME SA516, EN 10025 S355J2 N, ASTM A387 / ASME SA387, ASTM A537 / ASME SA537, ASTM A572 / ASME SA572

DIMENSION STANDARD

MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc

PLATES SIZE RANGE

Cold rolled Plate 0.5-6.4 mm, Hot rolled Plate 3.0–10.0 mm

PLATES WIDTH

1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc

PLATES LENGTH

2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc

THICKNESS

0.3 mm to 120 mm

TOLERANCES

EN 10258/ DIN 59381

FINISH

2B, 2D, BA NO (8), Cold rolled Plate (CR), Hot rolled Plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc.

HARDNESS

Half Hard, Soft, Hard, Quarter Hard, Spring Hard

VALUE ADDED SERVICE

Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication etc.

TYPES OF CARBON STEEL PLATES

a516-big-plate1
  • ASME SA516 GR. 60 Plate Distributor in USA
  • ASME SA516 Grade 70 Boiler Plates Distributor in Los Angeles
  • ASME SA516 GR. 60 NACE MR0103 Pressure Vessels Plates Distributor in USA
  • ASTM A516 Grade 70 NACE MR0175 Plate Distributor in USA
  • NACE HIC Tested SA516 Grade 60 Boiler Plates Stockist in New York
  • NACE HIC Tested A516 Grade 70 Boiler Plates Distributor in Chicago
  • A516 Grade 60 NACE Plate
  • Hot Rolled Steel ASTM A516 Gr 60 NACE Plates Distributor in Houston
  • Hot Rolled Steel ASTM A516 Gr 70 NACE Plates Distributor in USA
a516-big-plate3
  • EN 10025 S355 J2+N Steel Grade Plate Supplier in New York
  • S355J2 N Structural Steel Plates Supplier in Chicago
  • EN 10025 S355J2+N High Tensile Steel Plate Supplier in USA
  • EN10025 S355J2 N Low Alloy Steel Plate Manufacturer in Houston
  • EN 10025 S355 J2+N Steel Grade Plates Supplier in USA
  • S355J2 N Carbon Steel Plates Manufacturer in New York
  • S355J2+N Hot Rolled Steel Plates Distributor in USA
  • EN 10025 S355J2 N Offshore structure Plate Supplier in Chicago
  • S355J2+N Hot Rolled Steel Plate Distributor in New York
a537-class1-plate
  • ASTM A387 Grade 5 CL.1 / 2 Pressure Vessel Plates Manufacturer in New York
  • SA387 Gr 5 Class 2 Chrome Moly Plate Supplier in Houston
  • ASTM A387 GR.11 CL.1 Plates Manufacturer in USA
  • Chrome Moly ASTM A387 GR 11 CL. 1 Plates Supplier in New York
  • Chrome Moly ASME SA387 GR 22 CL. 1 Plates Exporter in USA
  • Alloy Steel ASME SA387 GR 22 CL. 1 Plates Supplier in Los Angeles
  • A387 Gr 22 Class 2 Alloy Steel Plate Exporter in New York
  • ASME SA387 Grade 22 CL.1 / 2 Pressure Vessel Plate Distributor in USA
  • Chrome Moly ASME SA387 GR 5 CL. 1 Plate Manufacturer in New York
mn-plate
  • 12- 14% High Manganese Steel Plate Exporter in New York
  • High Manganese Wear Resistant Steel Plate Manufacturer in Los Angeles
  • X120Mn12 Manganese Plates Stockist in Houston
  • DIN 1.3401 High Manganese Plates Manufacturer in USA
  • High Manganese Steel Plate Distributor in USA
  • ASTM A128 Austenitic Manganese Steel Plate Distributor in New York
  • 12-14% MN Plates Distributor in USA
  • BS EN 10204 3.1 mill certificate Manganese Steel Plate Stockist in Chicago
  • ASME SA128 Grade B2 Steel Plates Supplier in Houston
dsq-plate
  • High Tensile Strength DSQ Steel Plate Manufacturer in Houston
  • Boiler DSQ Plate Stockist in Los Angeles
  • Dead Soft Quality Plates Supplier in Chicago
  • ASME SA537 Class 2 Carbon Steel Plates Manufacturer in USA
  • A537 CL. 1 Boiler Plates Manufacturer in New York
  • ASME SA537 Class 2 Plate Manufacturer in Los Angeles
  • ASTM A537 Class 2 Pressure Vessel Plates Manufacturer in USA
  • ASME SA572 Grade 50 Carbon Steel Plate Supplier in Chicago
  • ASTM A572 GR. 50 Cold Rolled Plates Manufacturer in USA
abrasion-resistant-400-plate
  • AR Abrex 500 Plates Manufacturer in USA
  • Abrex Sumihard 500 Plate Exporter in Los Angeles
  • Quard 500 Plate Stockist in Chicago
  • Abrasion Resistant 400 Steel Plates Supplier in Houston
  • Abrex Sumihard 400 Plates Manufacturer in New York
  • High Quality Raex 500 Plates Manufacturer in USA
  • Rockstar 500 Plate Supplier in Los Angeles
  • Rockhard 500 BHN Hardness Plates Stockist in New York
  • AR 500 Plates Distributor in Houston

Industry Application

Application Industry

People Also Search For

Abrasion Resistant 400 Plates Manufacturer in New York, 5mm ASME SA572 GR. 50 Plate Exporter, 16mm DSQ Plate Exporter, 10mm Abrasion Resistant 400 Plates Exporter, ASME SA516 Grade 60 Hot Rolled Steel Plate Exporter in Los Angeles, Hot Rolled Steel ASME SA572 GR. 50 Plates Supplier in Chicago, ASME SA516 Grade 70 Carbon Steel Plate Manufacturer, 16mm ASTM A516 Grade 70 Boiler Quality Plate Stockist, 5mm High Manganese Steel 1.3401 Plate Exporter, EN 10025 S355J2 N Plate Stockist in USA, Pressure Vessel ASME SA516 Gr 60 NACE + HIC Plate Distributor, Pressure Vessel SA537 CL. 1 / 2 Plate Manufacturer in Houston, 10mm ASME SA387 GR. 11 Class 1 Alloy Steel Plate Supplier in USA, Abrasion Resistant 400 Plate Manufacturer in New York.

Country

City